As you all know flooring failures cost companies millions of dollars annually. Most failures are due to moisture-related issues.
Moisture in the pores of concrete can migrate toward the warm dry air above the surface, causing loss of adhesion and blistering. This can be minimized if not prevented with proper moisture testing prior to applying.
It is now easier than ever to perform ASTM F2170 since it has gone from being a 72-hour test to only a 24-hour test.
Check out our full line of moisture detection equipment at www.CatalystSalesLLC.com
Share this post
- 0 comment
- Tags: astm f-2170, concrete floors, concrete moisture measurement tools, concrete moisture testing, flooring, flooring adhesives, flooring installation, flooring installer, in situ, moisture meter, relative humidity, relative humidity in concrete, vinyl tile, wood flooring